Home
About us
Our Products
Contact us

Retractable Pole Inspection

 
Price: USD 4009$

Properties
  • A Sony Super HAD CCD camera with 12 built in IR LED's, 420TVL resolution.
  • Camera reach from 1.6 meters (5.25ft) to over 4 meters (13.12ft)
  • A 5" Color LCD monitor in a case complete with sunshield.
  • Extremely low discharge batteries.
  • A main battery with up to 3 hours continual use from full charge in complete darkness, or 3.5 hours continual use in daylight (fitted to rear of carry case).
  • A battery charger - 2.25 hours to re-charge from flat.
  • A back-up battery with up to 3 hours in darkness or 3.5 hours in daylight use, from full charge.
  • 1.8 meter (5.9ft) linking cable, to link between monitor and pole end connector.
  • Optional wheel for under vehicle inspection available.
  • Operational weight less than 2.7kgs (5.9lb).

Features

The Inspection camera is a battery operated lightweight with a telescoping shaft system that permits viewing in difficult to access areas either above or below ground.  With these abilities you can inspect attics, suspended ceilings, eaves trough’s, gutters, sewers or wells. 

This Inspection Camera is very easy to handle and gives you a very crisp and clear image either in daylight or the dark of  an area away from light thanks to its built in IR LED lights.  The telescoping of the pole allows you to view from 1.6 m to 4 m away. 

The TFT LCD monitor displays a brilliant clear image that is easy view in any lighting.  With 3.5 hours use in daylight to 3 hours use in the dark the COBRA Inspection Camera will deliver results that you need and when in need there is a back up batter with the same capacity. 

The charging of the battery only takes 2.25 hours from flat dead.  With an operation weight of just under 2.7 kg and a 1.8m linking cable makes this is a very portable and comfortable unit to use on any job site. 

Housing and Operation

      The camera is housed in a durable acetal body
      The camera housing is hinged at the base to allow multi     positioning of the head
      The camera mount is made from acetal which is permanently fixed to end of the Telescopic pole
      Tools supplied to permanently lock the camera in the operators desired position

Extendable Pole

 The total length of the pole closed is 1.63 metres (5.3ft)
 The total length of the pole including camera is just over 4   metres (13.1ft)
 The extendable pole is constructed from glass fibre, in 3 sections
 The locking clamps are of polymer construction
 Dual left handed or right handed lever
 Strong locking force
 All of the cables from the base of the pole to the camera are housed internally within the pole
The bottom of the pole is an acetal base with connector housing which has a built in 3 way connector.


 

   

©2012 Covert Equip
All rights reserved.
Home     |      About us       |      Our Products     |      Contacts